580Wp panels built to pull power from both sides.
Half-cut N-TOPCon cells, a 16-busbar layout and dual-glass construction, supplied and supported across South India by Semicon Solar.
~22.84%
Module Efficiency
80±5%
Bifaciality factor
30 yrs Performance warranty
~15%
Bifacial gain
Engineered for sites where every watt of generation matters
N-TOPCon cell architecture with a dual-glass, bifacial build — designed to hold output through heat, low light, and years of field exposure.
Very low light-induced degradation
N-type cell chemistry keeps output loss minimal from day one, so the yield you commission is closer to the yield you keep.
Positive power tolerance
Every solar panel ships at or above its rated wattage (0 to +3%) — no under-delivery hidden in the nameplate.
Stronger low-irradiance output
Generates more usable power through overcast mornings, haze, and early/late-day light than standard P-type panels.
Better heat behaviour
A temperature coefficient of −0.30%/°C means less power lost as rooftop and ground-mount temperatures climb through the day.
Rear-side generation
Bifacial glass-on-glass construction captures reflected light off the ground or roof surface, adding measurable power gain without adding roof area.
Built for harsh sites
Rated for 2400 Pa wind load and 5400 Pa snow load, with resistance to coastal, desert, and ammonia-exposed farm environments.
Bifacial gain
The back of the Solar Panel keeps working too
Actual gain depends on ground reflectance (albedo) and mounting height, but even a modest 5% rear contribution lifts a 580W solar panel past 600W — with the highest-rated variant crossing 670W at a 15% gain scenario.
Semicon Solar’s site teams factor local ground conditions into the albedo assumptions used for every bifacial design.
Tested against international standards
Every module passes 100% I-V measurement, HiPOT testing, and EL inspection before it leaves the line.
IEC 61215
IEC 61730
IEC 61701
UL 61215
UL 61730
IEC 61853-1&2
IEC 62804
IEC 62716
IS 14286
IEC 60068-2-68
IEC 61215
IEC 61730
IEC 61701
UL 61215
UL 61730
IEC 61853-1&2
IEC 62804
IEC 62716
IS 14286
IEC 60068-2-68
Mono PERC Half-Cut Cell Technology
Reduces internal resistance and improves overall module performance.
Bifacial Power Generation
Captures additional energy from rear-side reflected light.
Excellent Low-Light Performance
Ensures consistent output during early morning, evening, and cloudy conditions.
Positive Power Tolerance
Delivers assured output with a positive tolerance of up to +4.99 Wp.
High Mechanical Load Capacity
Certified to withstand heavy wind and snow loads for long-term reliability.
Technical Specifications
- Cell Type & Count: Mono PERC, 144 Half-Cut Cells
- Maximum System Voltage: 1500 V DC
- Temperature Coefficient (Pmax): −0.34% / °C
- Module Dimensions: 2278 × 1134 × 35 mm
- Weight: Approx. 28 kg
- Front Glass: 3.2 mm tempered glass
- Frame Material: Silver anodized aluminium profile
- Junction Box: IP67, 3 bypass diodes
- Certifications: IEC 61215, IEC 61730, IEC 61701, IEC 62804, IEC 62716